1. Swivel spreaders and place ends into grommets on either side of the hull of the boat.

2. Place masts into aluminum tubes and hook sails onto the front and rear. (Unwind bridle string from bowsprit first.)

3. Unroll connected sails. Hook loops onto the top of the masts and set sails into catches tied onto the masts. (Longer attachment strings are in the front.) Stretch plastic rings over the ends of the spreaders.

4. Placement of flying loop in bridle string can be determined by holding the kite into the wind by the bridle. If the loop is too low, the kite will not rise up. If the loop is tied too high the kite will be erratic.

5. Flies in light to medium winds. (5-15 MPH)